QUESTION 81 If you are calibrating for 2.4 GHz and the site will not be using 802.11 and 802.11b data rates, what should be done to ensure an accurate calibration? A. Make sure that the access points have the unused rates disabled. B. Make sure that you are using an 802.11b client when calibrating. C. […]
QUESTION 71 When surveying and deploying a mesh network, considerations need to be made for the actual path selection process made by AWPP for any MAP to reach the final RAP. Which two factors are used by AWPP in path selection calculation? (Choose two.) A. Beamwidth B. RSSI C. SNR D. Hop count E. Interface […]
QUESTION 61 You have a customer that is renovating a historic building for a new headquarters. The building was once an old manufacturing plant. It is constructed of brick with heavy timber beams. What type of RF issues do you expect to see while performing the site survey? A. The RF signal will be reflected […]
QUESTION 51 How many access points will a Cisco 7600 Series Router with six installed Cisco Catalyst 6500 Series Wireless Services Modules support? A. 300 B. 448 C. 664 D. 1800 E. 2400 Answer: D
QUESTION 41 When using WCS 7.0 to calibrate a floor, is it more important to collect 50 or more distinct locations or to collect 150+ measurements? A. 150+ measurements are more important than the locations because the information gathered is more granular. B. Collecting 50 or more distinct locations is more important because this provides […]
QUESTION 31 What is the result of a Cisco 1250 AP deployed for 802.11a/b/g/n using optimized power (16.8 W) with software version 7.0? A. One spatial stream per radio B. One spatial stream on 2.4 GHz and two spatial streams on 5 GHz C. One spatial steam on 5 GHz and two spatial streams on […]
QUESTION 21 What are the most appropriate channels for an 802.11a/n VoWLAN survey and deployment in the FCC domain? A. 4 channels of UNII-1 B. 8 channels of UNII-1, and UNII-2 C. 8 channels of UNII-1, and UNII-3 D. 15 channels of UNII-2, and UNII-2 extended E. 23 channels of UNII-1, UNII-2, UNII-2 extended, and […]
QUESTION 11 What is the recommended method to protect a wireless outdoor bridge from lightning? A. Install the wireless outdoor bridge in a grounded NEMA enclosure. B. Install the wireless outdoor bridge inside a building if possible and only have the antenna outside. C. Install a fiber-optic link between the wireless outdoor bridge and the […]